Turntable



This tower type turntable is demonstration of capabilities. It is designed for adjustability and adaptability to different motors, platter bearings, and tonearms.


The table shown uses a VPI motor, bearing, platter, and speed control. The tonearm is a Moerch DP-8 with a Van Den Hul cartridge.


344 print hours and 7150 kilograms of filament were used.


Price for the tower printing and fitting is $4000. Parts and design work extra. Phono preamp not included.





Omni directional speaker



The omni directional speaker shown below is available in different colors and textures. Due to the time involved, speakers are a custom build.


Omni directional speakers work well in rooms with 10 foot or more ceilings and 400 square feet or more.


The 2 inch compression horn driver is by Faital Pro. The woofer / mid range driver is 12 inches and is also by Faital Pro.


The crossover point is at 500 hz and is constructed with Mundorf silver / gold / oil capacitors and Mundorf inductors. Inductive and capacitive compensation is included. The -3db lower frequency is 33 hz.


Internal wiring is the same Argentium silver used in our speaker cables.


35 kilograms of filament and 1150 printing hours are required.


Enclosures dimensions are 28 by 14 by 59 inches.


Price $17,500 for the pair plus shipping.


Build time is 8 to 10 weeks once work begins.





Directional speaker



The directional speaker shown below is available in different colors and textures. Due to the time involved, speakers are a custom build.


The rocket shape was chosen to minimize the floor space foot print and shipping cost. The cabinet consists of 4 sections with threads and collars that twist together.


The 4 inch mid tweeter driver is by Faital Pro. The woofer / mid range driver is 12 inches and is also by Faital Pro.


The crossover point is at 500 hz and is constructed with Mundorf silver / gold / oil capacitors and Mundorf inductors. Inductive and capacitive compensation is included. The lower -3db frequency is 33 hz.


Internal wiring is the same Argentium silver used in our speaker cables.


55 kilograms of filament and 1954 printing hours are required.


Enclosures dimensions are 13 by 84 inches.


Price $17,000 for the pair plus shipping.


Build time is 8 to 10 weeks once work begins.





Swan Song Audio



Designing and building low noise high performance audio products in America


info@swansongaudio.com